This small, light and portable USB oscilloscope captures and displays significantly more signal to solve all your measurement problems. Because of this, the Handy scope HS6 DIFF series is an ideal choice for demanding measurements. A case in point would be the ability to expand your channels with the CMI interface while building a comprehensive measuring system within seconds. As a high-resolution USB oscilloscope, it comes equipped with a lower noise and high sensitivity with 4 differential input channels and an amazing 256-million-point record length. This is made possible by a sampling rate of 1GS/s, a switchable hardware-based bandwidth limiter of 150MHz, 100MHz and 50MHz, a high performance digital multi-meter, as well as a highly accurate time base of 1 ppm.
In a testament to its versatility, the USB 3.0 PC oscilloscope is equipped with an EMI pre compliance tester, a high-resolution multi-meter, innovative technology such as SureConnect, SafeGround, CMI interfacing, as well as an Ohm scope which uses the same inputs as the oscilloscope.
Review of Key specifications
The powerful capabilities of the Handyscope HS6 DIFF EMI analyzer gives the user the possibility to quickly perform a good EMI compliance test. However, to guarantee comprehensive and accurate compliance tests, a fixed tripod ensures that the probes can be positioned properly at the object under test. In other words, the tripod allows exact positioning of the probe near the test subject. Accordingly, the EMI analyzer has a very low-resolution bandwidth of up to 7.45 Hz (at a span of 500 MHz), which is unique in its class, meaning that each part of the spectrum can be analyzed thoroughly.
Finally, the EMI probe set of probes are conveniently packed in a carry case whereby, the set contains three differently sized H field probes and an E field probe. To connect the probes to the scope, a short semi flexible antenna cable and a long flexible antenna cable are included.
To reduce the risk of a short circuit, there are no connections between the channels and the ground wire of the device. This is because the oscilloscope comes with differential inputs, as well as SafeGround technology that enables a connection to a standard 1:10 probe - which is not possible with a standard differential channel of other oscilloscope manufacturers.
You have selected the maximum number of devices allowable for comparison